Servo Motor Hydraulic Press Die Cushion With Movable Worktable Deep Drawing

Servo Motor Hydraulic Press Die Cushion With Movable Worktable Deep Drawing

industry belongs to ZHENGXI Yz27 series which mainly be used on metal forming technology, also called metal stamping press, sheet metal deep drawing press or H frame type hydraulic press.

Application

ZHENGXI Yz27-800T H Frame Servo Motor Energy Saving Sheet Metal Deep Drawing Hydraulic Press Machine for automobile industry are used for stamping, deep drawing and powder forming have multi-function can process sheet metal including technology like deep drawing, stamping, bending, cutting and flanging. It can apply on almost ALL kinds of forming techinology. Usually it can be used on following technology.

• Metal sheet deep drawing, bending, flanging, cold extrusion, cutting

• Calibration, press-fit, powder forming, abrasive products forming

• SMC/BMC/GMT, plastic products, rubber products, insulation material heat press

This kind of press machine are widely been used for automobile industry.

Key Features

• Body: Main body use Q345B steel and main big parts are with welded structure, in order to make sure the quality of welding, those big parts will be processed with annealing treatment to eliminate welding deformation and stress, positioned block has been used in the joint surface between the lower platen, column, beam to prevent dislocation to guarantee the precision of installation; Four tie bar has been pre-tightened by hydraulic force, slide use eight side guiding system to reach the advantage of high adjustable precision, good rigidity. Besides, the guiding system use wear resistant bronze material, it has good wear resistance and long life use.

Deep Drawing Press also called metal stamping press,metal forming press, it is used for deep drawing,stamping,punch of metal sheet for automobile ,kitchen utensils and household appliance industries.

The hydraulic press depends on Pascal's principle-the pressure throughout a closed system is constant. One part of the system is a piston acting as a pump, with a modest mechanical force acting on a small cross-sectional area; the other part is a piston with a larger area which generates a correspondingly large mechanical force. Only small-diameter tubing (which more easily resists pressure) is needed if the pump is separated from the press cylinder.