Hydraulic Deep Drawing Press Metal Stamping Press 1300Ton Automatic hydraulic press Hydraulic metal press

This equipment is especially suitable for various processes such as bending, forming and flanging of central load parts. It can also be used for punching and blanking processing after being equipped with punching buffer device. It is a ship industry, pressure vessel industry, chemical industry, etc. Preferred product.
It is used for the process of stretch forming, tumbling, bending and stamping of sheet metal parts. It can also be used in general pressing process. It can add punching buffer, material feeding and moving table according to user needs.
The slider is a steel plate welded box structure, and the bottom plate of the slider is a single steel plate to ensure sufficient rigidity and strength. The slider is guided by 45° guide rails, and four guide plates are arranged on the left and right vertical columns. The guide rails of the sliders are vertically moved on the guide plates, and the movement guiding precision is adjusted by the inclined iron on the slide rails to ensure the movement table. The parallelism is easy to adjust, the adjustment precision is high, the precision after adjustment is good, and the anti-offset capability is strong. The side of the friction pair of the guide rail is made of alloy material, and the other side is made of copper-based alloy material. In addition, the guide plate is quenched and has a hardness of more than HRC55, good wear resistance and long service life. The slider rail surface is provided with a refueling hole for refueling to lubricate the moving part. Hydroforming Press

Precautions for frame hydraulic presses during city test:
Before starting the machine, you must understand the mechanical principle of the machine, let the motor run 2-3 times. If the inverter is reversed, adjust the two-phase power cord. After replacing the hydraulic oil, the pressure of the relief valve should be adjusted to a small value. After normal operation, slightly increase the pressure, drain the air in the system and test the pressure.

Features

1.Hydraulic machine that used the hydrostatic pressure to process metal, plastic, rubber, wood, powder and other products .

2. It is commonly used in the pressing process and press forming process, such as: forging, stamping, cold extrusion, straightening, bending, flanging, sheet metal deep drawing, powder metallurgy, press-fit etc.

3.Significant technical and economic advantages in reducing weight, reducing the number of parts and the number of molds, improve the stiffness and strength, reduce production costs, etc.

Parameters

Mold		unit	63T	100T	160T	200T	250T	315T	500T	630T	800T	1000T	1250T
Main cylinder (slider) process specs	Max.press force	KN	630	1000	1600	2000	2500	3150	5000	6300	8000	10000	30000
	Max.return force	KN	150	100	315	450	540	630	1000	1000	1200	1600	2100
	Down speed	mm/s	100	100	160	160	140	140	140	250	200	150	150
	Slow speed	mm/s	20	15	15	15	12	15	15	15	15	15	12
	The proportion of floating pressing speed	mm/s	20.00	15.00	15.00	15.00	15.00	15.00	15.00	15.00	15.00	15.00	15.00
	Press speed	mm/s	10	10	10	10	7	8	8	8	8	8	6
	Return speed	mm/s	120	120	120	110	95	100	100	150	150	120	120
	Max.stroke	mm	400	500	500	500	500	500	600	600	600	600	600
Top cylinder process specs	Max.ejection force	KN	280	440	450	900	900	1250	1800	2200	2200	2750	10000
	Max.pull force	KN	280	360	450	750	750	1250	1800	2200	2200	2750	2750
	Max.stroke	mm	150	150	150	150	150	150	150	150	150	150	150
	Eject speed	mm/s	80	34	65	55	50	50	50	60	60	60	60
	Floating speed	mm/s	20.00	15.00	15.00	15.00	15.00	15.00	15.00	15.00	15.00	15.00	15.00
	Return speed	mm/s	80	42	95	70	70	50	50	60	60	60	60
Upper center cylinder process specs	Max.press force	KN	60	60	60	125	150	125	200	200	240	240	500
	Max.return force	KN	30	30	30	76	76	76	130	130	140	140	200
	Max.stroke	mm	30	30	30	45	45	45	50	50	50	50	50
Under center cylinder process specs	Max.press force	KN	70	70	125	160	160	200	200	300	300	300	1000
	Max.return force	KN	40	40	75	100	100	100	100	200	200	200	260
	Max.stroke	mm	150	150	150	150	150	150	150	150	150	150	150
Upper floating cylinder process	Max.press force	KN	120	120	130	250	250	300	400	400	480	480	1000
	Max.return force	KN	60	60	65	150	150	160	200	200	240	240	250
	Max.stroke	mm	45	45	50	60	60	70	70	70	70	70	70
Effective worktable size	L-R	mm	580	720	780	1000	1000	1000	1200	1320	1400	1600	2400
	F-B	mm	490	580	640	940	940	960	1140	1200	1200	1350	1460
Max.pressure of liquid		mpa	25	25	25	25	25	25	25	25	25	25	25
Max.filling height		mm	120	120	120	120	120	120	120	120	120	120	120
Main motor power		KW	7.5	11.5	18.5	22	22	30	48	67	82	100	100